Subject to modification!
Updated 10/2017
99
G
ener
al
O
p
er
atio
n
Inst
all
atio
n
O
p
er
atio
n
(
S
e
rvi
ce
)
Ma
int
enan
c
e
8.10.5
Portal connection
Select the
Network
tab from
Settings
.
By default, the storage device uses the customer's network
settings.
For this, the selection field next to
Activate DHCP
is checked as a
default setting.
If the connection is not made automatically, use the parameters in
the instructions for the network router. DNS and gateway address
are usually identical for commercially available DSL routers. These
addresses can differ for company networks. Moreover, ports 4500,
21 and 37 need to be enabled for the connection to the portal (does
not apply for all users).
i
If IP address, DNS address and gateway are to be
set up statically, knowledge of the static address
assignment is required.
For this, it is required to read out the router's
network configuration, for example.
The address range 172.30.xxx.xxx and
172.31.xxx.xxx must not be used as a static or
dynamic IP for the storage system.
See Chapter 9.4.2.
