POWX1310
EN
Copyright © 2021 VARO
P a g e
|
5
www.varo.com
Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous
in the hands of untrained users.
Maintain power tools. Check for misalignment or sticking of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from intended could lead to a hazardous situation.
5.5
Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6 SPECIFIC SAFETY WARNINGS
Sawdust and splinters must not be removed while the machine is running.
Do not use cutting discs or circular saw blades in the machine.
Protect saw blades against shocks and impacts
Only use properly sharpened blades, otherwise increased culling forces will shatter the
work piece.
Before use, inspect the saw blade for any damage. Do not use saw blades that are
cracked, ripped or otherwise damaged
Make sure that the work piece is sufficiently supported or clamped. Keep your hands away
from the surface to be cut
Use the machine only with the auxiliary handle.
When saw blades have to be mounted on the thread of the spindle, make sure that the
spindle has sufficient thread
Make sure that the saw blade has been mounted and fastened properly. Do not use
reducing rings or adapters to make the saw blade fit properly.
Apply the machine to the work piece only when the machine is switched on.
When working with the machine always hold the machine firmly with both hands and
provide for secure distance.
Persons under 16 years of age are not permitted to operate this machine.
