POWP3030
EN
Copyright © 2018 VARO NV
P a g e
|
2
www.varo.com
HAMMER DRILL 1050W
POWP3030
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiseling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
Warning! Read this manual and general safety instructions carefully before
using the appliance, for your own safety. Your power tool should only be
passed on together with these instructions.
2 DESCRIPTION(FIG.1)
1.
Dust cap
2.
Fastening sleeve
3.
Auxiliary handle
4.
Oil cover
5.
Collar mount
6.
Hammer/drill switch
7.
Locking knob
8.
Double AVS system (Anti Vibration
System)
9.
On/off switch
10. Power light
3 PACKAGE CONTENT LIST
▪
Remove all packing materials
▪
Remove remaining packaging and transit supports (if existing)
▪
Check the completeness of the packing content
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
▪
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
▪
Hammer drill
▪
Auxiliary handle
▪
Dust cap
▪
Spanner
▪
Grease cup
- 1 SDS drills Ø18 x 320mm
- SDS point chisel: 320 mm
- SDS flat chisel: 18 x 350mm
When parts are missing or damaged, please contact your dealer.
