POWESET2
EN
Copyright © 2018 VARO
P a g e
|
8
www.varo.com
grinder gently along the item. Give the grinder time to work. It is rarely necessary to press the
disc hard against the surface to be worked. Sparks can occur in the motor compartment during
use. This is normal and does not mean the grinder is defective. Switch off the grinder after use.
9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS
9.1
Flange arrangements when using a depressed centre or straight grinding wheel
1 Clamping flange
2 Flange nut
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
10.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2
Lubrication
The machine does not require any specific lubrication.
11 TECHNICAL DATA
Voltage / frequency
230-240 V / 50 Hz
Power input
900 W
No load speed
12,000 min-1
Max. disc diameter
Ø 125 mm
Drive spindle thread
M 14
