POWDP9060
EN
Copyright © 2017 VARO
P a g e
|
6
www.varo.com
NOTE: If battery is hot after continuous use in the tool, allow it to cool down
to room temperature before charging. This will extend the life of your
batteries.
NOTE: Remove battery pack from charger stand which use your thumb or
fingers, press the battery
’s release button in and pull the battery pack off at
the same time.
7.2
Battery capacity indicator (Fig. 1a)
There are battery capacity indicators on the battery pack, you can check the capacity status of
the battery if you squeeze the button. Before using the machine, please press switch trigger to
check if the battery is full enough for properly working.
Those 3 LED might show the status of the capacity level of the battery:
3 LED’s are litt: Battery fully charged
2 LED’s are litt: Battery 60% charged
1 LED is litt: Battery almost discharged
8 TECHNICAL DETAILS
Type
POWDP9060
Voltage
20V
Battery type
Li-ion
Battery capacity
20V
– 1500mAh
Charger rating input
100-240V~50Hz
Charger rating output
20,5V, 2.5A
Charging time
20V = 1h
9 ENVIRONMENT
9.1
Battery pack
This product contains Li-ion. To preserve natural resources, please recycle or
dispose of batteries properly. Local, state or federal laws may prohibit disposal of
Li-ion batteries in ordinary trash. Consult you local waste authority for information
regarding available recycling and/or disposal options.
