background image

 

POWDP7080 

EN

 

Copyright © 2019 VARO NV 

P a g e

 | 

5

 

www.varo.com 

 

Use safety equipment. Always wear eye protection. Using safety equipment such as a 
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed 
will reduce the risk of personal injury. 

 

Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. 
Carrying power tools with your finger on the switch or plugging in power tools when the 
switch is in the on position makes accidents more likely. 

 

Remove any adjusting keys or spanners before turning on the power tool. A spanner or 
key left attached to a rotating part of the power tool may result in personal injury. 

 

Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable 
you retain control over the power tool in unexpected situations. 

 

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and 
gloves away from the power tool. Loose clothes, jewellery or long hair can become 
entangled in the moving parts. 

 

If there are devices for connecting dust extraction and collection facilities, please ensure 
that they are attached and used correctly. Using such devices can reduce dust-related 
hazards. 

 

Recharge only with the charger specified by the manufacturer. A charger that is suitable 
for one type of battery pack may create a risk of fire when used with another battery pack. 

 

Use power tools only with specifically designated battery packs. Use of any other battery 
packs may create a risk of injury and fire. 

 

When battery pack is not in use, keep it away from other metal objects, like paper clips, 
coins, keys, nails, screws or other small metal objects that can make a connection from 
one terminal to another. Shorting the battery terminals together may cause burns or a fire. 

 

Under abusive conditions, liquid may be ejected from the battery; avoid contact. 

 

If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek 
medical help. Liquid ejected from the battery may cause irritation or burns. 

5.4 

Service 

 

Your power tool should be serviced by a qualified specialist using only standard spare 
parts. This will ensure that it meets the required safety standards. 

6  SPECIFIC SAFETY INSTRUCTIONS 

 

Firmly tighten the mixing paddle, and remove the spanner before starting the machine. 

 

Do not use the device in a potentially explosive environment. 

 

Do not use the device to stir solvent or other materials at a temperature above 21°C 

 

Wrap the cable and avoid physical contact with the cable. 

 

Only use extension cords, which are suitable for exterior 

 

Before switching on and off, make sure that the paddle is located in the shaft. 

 

Never mix or stir explosive or inflammable substances. 

 

When mixing, wear proper personal protection measures for eyes, ears, hands and 
breathing. 

 

This appliance is not suitable for mixing edible things. The appliance cannot be adequately 
cleaned in order to comply with hygiene regulations. 

7  ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND 

CHARGERS 

Use only batteries and chargers applicable for this machine. 

7.1 

Batteries 

 

Never attempt to open for any reason. 

 

Do not store in locations where the temperature may exceed 40 °C. 

 

Charge only at ambient temperatures between 4 °C and 40 °C. 

Summary of Contents for POWERPLUS POWDP7080












Reviews: