POWDP1570
EN
Copyright © 2018 VARO
P a g e
|
3
www.varo.com
HAMMER DRILL 40 V
POWDP1570
1 APPLICATION
The machine is intended for hammer drilling in concrete, brick and stone, as well as for light
chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and
plastic. Not suitable for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1.
Dust cap
2.
Fastening sleeve
3.
Auxiliary handle
4.
Function mode selector
5.
On/off switch
6.
Depth stop
7.
Lock knob for depth stop
8.
Handle
9.
Forward/reverse knob
10. LED work light
11. Battery pack release button
12. Battery capacity indicator
13. Button for battery capacity indicator
3 PACKAGE CONTENT LIST
▪
Remove all packaging materials.
▪
Remove remaining packing and package inserts (if included).
▪
Check that the package contents are complete.
▪
Check the appliance, the power cord, the power plug and all accessories for transportation
damage.
▪
Keep the packing materials as far as possible till the end of the warranty period. Dispose it
into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
▪
Hammer drill
▪
Depth stop
▪
Auxiliary handle
▪
Dust cap
- 3 SDS drills: Ø8 & 10 & 12 x 150 mm
- SDS point chisel: 250 mm
- SDS flat chisel: 14 x 250 mm
▪
Instruction manual
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the tool.
In accordance with essential
requirements of the European
directive(s).
Read manual before use.
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary (only for charger).
