POWXG60215
EN
Copyright © 2015 VARO
P a g e
|
8
www.varo.com
Caution: Traction and starter cables must always be positioned on top of
the cross bar of the push handle. This provides free movement of the
cables on top of the lower section of the push handle, when the handle is
folded. Incorrect mounting of these cables could lead to damaging and/or
straining them, resulting in a malfunction of the machine. In this case the
guaranty is void.
8.2
Wheel assembly (Fig. 2)
Make sure that the nut of the rear wheels are tighten strong enough. Both front wheels are
mounted with a ring and held with a clip ring.
8.3
Mounting the grass catch bag (Fig. 3)
Take the grass box and metal bracket out of the packing.
Put the metal bracket into the grass box, keep the handle outside.
Fix the plastic jacket in the metal bracket.
8.4
Starter handle (Fig. 4)
Move the starter handle from the engine to the rope guide.
9
OPERATION
9.1
Before starting
This lawn mower is shipped WITHOUT OIL OR GASOLINE in the engine
9.1.1
Add oil
Before each subsequent use the oil level must be check and if necessary topped up with500ml
SAE30 engine oil.
CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the
muffler on startup.
Be sure lawnmower is level.
Remove oil dipstick from oil fill spout.
Insert and tighten dipstick.
IMPORTANT:
Check oil level before each use. Add oil if needed. Fill to full line on dipstick.
Change the oil after every 25 hours of operation or each season. You may need to change
the oil more often under dusty, dirty conditions.
9.1.2
Add gasoline (Fig. 5)
WARNING: never fill fuel tank indoors, with engine running or until the
engine has been allowed to cool for at least 15 minutes after running.
Fill fuel tank to base of tank filler neck. Use fresh, clean, regular unleaded gasoline.
Do not overfill.
Do not mix oil with gasoline.
To assure fuel freshness, only purchase fuel in quantities that can be used within 30 days.
