POWXG60210
EN
Copyright © 2015 VARO
P a g e
|
7
www.varo.com
Only use the recommended blades and spare parts by the manufacturer. The use of non-
genuine parts can damage the machine and injure the operators. Keep the lawnmower in
good working condition.
If the blade stopping device doesn’t work, please contact service centre for help.
Warning: Do not touch rotating blade.
Warning: Refuel in a well ventilated area with the engine stopped.
6
SAFETY WARNINGS
Operate the lawn mower only with the grass box and/or the deflector plate installed.
Stop the engine before emptying the grass box or adjusting the cutting height.
Keep your hands and feet away from the area under the lawn mower or under the grass
discharge, while the engine is running.
Before mowing, clear the lawn of any foreign objects which could be thrown up by the
lawn mower.
Keep children, other persons and pets at a safe distance, while operating the lawn mower.
Never tilt the lawn mower while starting it.
7
SAFETY WARNINGS GASOLINE
WARNING: Use extra care in handling fuels. They are flammable and the
vapours are explosive. The following points must be observed.
Use only an approved container.
Never remove the fuel cap or add fuel with the power source running. Allow engine
exhaust components to cool before refueling.
Do not smoke.
Never refuel the machine indoors.
Never store the machine or fuel containers inside, where is an open flame, such as a
water heater.
If fuel is spilled, do not attempt to start the power source, but move the machine away
from the area of spillage before starting.
Always replace and securely tighten the fuel cap after refueling.
If the tank is drained, this should be done outdoors.
8
ASSEMBLY
8.1
Folding handle (Fig. 1)
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
Raise handles until lower handle section locks into place in mowing position. Tighten all
bolts.
Remove protective padding, raise upper handle section into place on lower handle and
tighten both handle knobs.
Remove handle padding holding operator presence control bar to upper handle.
