VARO POWERplus GardenPro POWXG2032, Manual, Page: 8 / 12

POWXG2032
EN
Copyright © 2014 VARO S i d e | 8 www.varo.com
7.3 Changing the blade
Wear gloves when changing the blade.
7.3.1 Removing

Push the SDS-blade cover release button
10 and slide the cover 7 towards the
On/Off switch 6.

Lift away from the housing.

Lift the blade 1 out.
7.3.2 Fitting

Fit the blade as shown aligning the holes
in the blade onto the drive pins.

When refitting the SDS drive cover
ensure all 4 location legs are inside the
housing prior to sliding cover into place.

Slide the blade cover back towards the
blade 1 to secure.