POWXG2015
EN
Copyright © 2014 VARO
P a g e
|
13
www.varo.com
Check the sparking plug and replace it if too much of the firing tip has been burnt off.
Keep the blade in a dry place
– out of the reach of fire.
12 STARTING UP AFTER LONGER PERIODS OF INACTIVITY
Remove the sparking plug.
Quickly pull the starter cord right through several times in order to remove oil and deposits
in the engine compartment.
Check the sparking plug, replace it if necessary and screw it in.
Fill the petrol tank with the 2-stroke mixture.
13 TECHNICAL DATA
Engine displacement
25.4cc
Construction
Hand-held
Weight
6.1kg
Fuel tank capacity
600ml
Blade length
600mm
Blade speed
1650r/min
Max. engine speed
8500r/min
Engine idle speed
3400r/min
Clutch engagement speed
4300r/min
Output power
900W
Engine oil / gasoline mixed ratio
1:40
14 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
91 dB(A)
Acoustic power level LwA
114 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A).
aw (Vibration):
Max 8.4 m/s²
K = 1.5 m/s²
15 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or by
a qualified specialist (qualified electrician).
