POW63703
EN
Copyright © 2014 VARO
P a g e
|
4
www.varo.com
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Denotes risk of personal
injury or damage to the tool.
Read manual before use
Keep bystanders away
Warning! Flying objects
Keep hands and feet away
from sharp parts.
Remove plug from the
mains immediately if the
cable is damaged or cut.
Indicates electrical shock
hazard.
Never operate the
machine in the rain or in
damp or wet conditions.
Moisture is an electrical
shock hazard.
Wear ear guards and
goggles
Keep the power cable
away from the cutters!
In accordance with essential
safety standards of
applicable European
directives
Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary.
Wait until all machine components have completely stopped before
touching them. The blades continue to rotate after the machine is switched
off, a rotating blade can cause injury.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) power tool.
5.1
Working area
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2
Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
