POW63703
EN
Copyright © 2014 VARO
P a g e
|
10
www.varo.com
Replacement blade, as this will ensure top performance and safety under all conditions. Carry
out the following steps to change the blade:
Turn the mower onto its side.
Grip the blade( C) with one hand.
Use the spanner supplied to loosen and remove the blade nut (B).
Replace the blade
Securely tighten the blade nut.
11 TECHNICAL DATA
Rated Voltage
230-240V
Rated Frequency
50Hz
Rated Power
900W
Rotation speed
3000min
-1
Cutting width
320mm
Protection class
Class II
Int. protection degree
IPX4
Collect box / bag
35L
Cutting heights
25/40/55mm
Induction motor
Yes
12 NOISE
Noise emission values measured according to relevant standard. (K=2)
Acoustic pressure level LpA
75 dB(A)
Acoustic power level LwA
89 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
7.1 m/s²
K = 1.5 m/s²
13 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a qualified specialist (qualified electrician).
14 STORAGE
Always clean your mower before storage. Store your mower in a clean, dry environment.
To avoid mould on remaining contents, make sure the grass collect bag is empty and dry.
You can fold the handle to save space, loosen the 2 clamps on each side of the handle and
bend the upper handle part towards the front of the machine.
14.1
Long time storage:
Apply some environmentally friendly oil on the mower blade to prevent it from rusting.
14.2
Hibernation
Have your blade sharpened after the mowing season, so your machine is ready for the new
season.
