6
Värmebaronen Vedolux 55
Congratulations on making a good choice!
Wood boiler with inverted combustion and suction fan for large properties
Vedolux 55
• is a wood-fired boiler with a suction fan, designed for
heating properties.
• must be fired in combination with an accumulator.
• has environmental approval.
• is designed for half-metre wood.
• is designed for connection to an external water heater
suitably located in the accumulator.
• has an output of 180 - 195 kBTU/h.
• has an output with pellets of up to 171 kBTU/h.
Ceramic combustion chamber
The combustion chamber is designed for inverted
combustion.
The depth of the combustion chamber is 22.6 in.
How it works
Vedolux 55 uses so-called inverted combustion.
The suction flue gas fan causes the flames to move
downwards through the grate. The gases remaining are
combusted in the ceramics.
The hot flue gases then continue through the boiler's
flues, where the heat is absorbed, and then up through
the chimney.
Sweeping
All flues in the boiler are swept from the same hatch
on the front of the boiler. As the flues are round, it is
not possible to miss any inaccessible corners when
sweeping.
Chimney
Vedolux 55 has a suction fan which means that the
boiler has minimal requirements for the chimney
conditions.
Accumulator tank
To achieve the best combustion and efficiency, and
to meet the environmental requirements for wood
firing, the boiler must be fired in combination with
an accumulator tank.
Included in the delivery
• Sweeping tool
• Mains power cable
• Turbulators
• LPG ignition
• Flue pipe to rear
Accessories
• Flue pipe upwards
art. no.: 711701
• Accumulator control 3
art. no.: 2912
• Draught hatch
art. no.: 2961
