DANGER
It is recommended to install the appropriate protection devices upstream of the device,
such as a circuit breakers, fuses and a residual current device (RCD).
DANGER
Make sure that the device and the loads connected to it are properly grounded with the
appropriate connection terminals before commissioning.
Ensure that the grounding system is compliant and refer to local regulations for grounding
devices.
Each load must be fitted with its own earthing cable, the length of which must be as short
as possible. Do not make interconnected grounding connections.
Leakage currents may exceed 3.5 mA. It is recommended to use the reinforced ground
connection if necessary.
CAUTION
During device operation, some surfaces may reach high temperatures that may cause
burns upon contact with skin. Be very careful when touching the device!
Avoid contact with flammable products.
WARNING
Do not place any interrupting or switching devices between the inverter and the load. In-
terruption or switching during motor operation may cause serious damage to the device.
WARNING
Do not perform insulation tests on the load or power cable without first disconnecting
them from the device.
2.4. Acoustic emission
The device has a noise emission:
< 65 dB at a distance of 1 meter with the cooling fans at maximum speed.
2.5. Certifications
The product has the following certifications:
• CE
PSDrive
9
