Variscite VAR-SOM-MX6, Quick Start Manual

Page: 1 / 2

VAR-SOM-MX6 based on
NXP’s i.MX6
Evaluation Kit Quick Start Guide
Evaluation Kit initial Setup
1. Carefully remove the Evaluation Kit from the package.
2. Plug the RS232 cable between Debug UART connector (J34) and a
PC serial interface (DTE).
Note: Pin #1 on the RS323 cable marked with arrow should be connected
To Pin #2 of J34 marked on PCB.
3.
Plug the wall adapter’s pin into the VAR-MX6CustomBoard
12V power jack (J19) and to a 120VAC~240VAC power source.
1 2 3
4
5
6
7 8 9
10
11
12
13
Top side:
1. LVDS Display
2. Extension Headers
3. Debug UART (J34)
4. Reset Button
5. Boot Select button (SW3)
6. User/Back Button
7. Extension Headers
8. Capacitive LCD Backlight
9. On/Off switch (SW1)
10. 12V DC In Jack (J19)
11. Headphones
12. Line In
13. MIPI CSI-2 Camera - connects to
Variscite’s
VAR-
EXT-CB402 Camera board
Bottom side:
14. PCI Express
15. SIM Card
16. SATA
17. JTAG
18. UART DTE
19. Gigabit Ethernet
20. USB Host
21. Extension Header
22. SD Card (J13)
23. Resistive LCD
24. USB OTG
25. Resistive Touch
26. Extension Header
27. Capacitive LCD
28. RTC Battery Holder
29. Capacitive Touch
30. HDMI
31. USB Host x 2