*
NOTE
:
VAR-DVK-AM43 supports dual GbE w/o Wi-Fi / BT
VAR-DVK-AM43_W supports single GbE and Wi-Fi /B
VAR-SOM-AM43 based on TI AM437x
Evaluation Kit Quick Start Guide
11
18
1
3
5
8
23
24
22
20
9
10
2
4
6
7
16
15
14
13
12
21
19
17
27
29
25
28
26
Evaluation Kit initial Setup
1.
Carefully remove the 7” LCD and VAR-AM43CustomBoard board from the
package.
2.
Connect the 7” LCD Touch and Display cables to the Evaluation Kit connectors
J7, J15 respectively as shown in the upper left picture.
Note
:
Display cable connector pins 1, 2 (colored in red) should be connected to
J15 pins 1, 2 respectively.
Touch cable
– connect the cable with metal contacts facing down.
Top side:
1. 5V DC In Jack (J12)
2. USB0 Host
3. RS232 Header (J8)
4. USB1 Host
5. I2C / SPI Connector (J9)
6. 10/100/1000Mbps ETH1 (J5)
7. 10/100/1000Mbps ETH2 (J6) *
8. Camera Header
9. Headphones Jack (J17)
10. Line In (J18)
11. USB Debug (J22)
12. USER Button3 (SW6)
13. USER Button2 (SW5)
14. USER Button1 (SW4)
15. Reset Button (SW3)
16. Digital Audio / SPI (J21)
17. GPIO Headers (J19 / J20)
18. Boot select switches
19. UART3 Header (J16)
20. LVDS Display Connector
21. UART1 Header (J14)
22. A2D Header (J10)
23. CAN / RS-485 Header
24. Capacitive Touch (J7)
Bottom side:
25. microSD connector (J103)
26. OV2659 Image-sensor
27. USB0 OTG
28. Resistive Touch
29. RTC Battery Holder