11
TriScroll 300 Dry Scroll Vacuum Pump
DRAFT 2
/
10
/
0
5
TriScroll 300 Reassembly
1. Insert the new tip seal into the scroll tip
grooves on the inboard housing side of the
orbiting plate.
2. Cut the seal to the correct length at the end
of each groove. Leave a gap of 1/4" (6 mm)
from the outer end to allow for thermal
growth.
3. Insert the new tip seal into the scroll tip
grooves on the inboard housing.
4. Cut the seal to the correct length at the end
of each groove. Leave a gap of 1/4" (6 mm)
from the outer end to allow for thermal
growth.
1
2
3
4
5
6
7