ProStar 701 Fraction Collector Control Manual
- 5 -
03-914947-27:2
Define the number of ProStar 701 Fraction Collector installed in
the
Number of instrument
spin edit. Up to four ProStar 701
Fraction Collectors can be defined.
For each fraction collector, define the address in the
Fraction
Collector X ID
field. Then press the
button, to connect to the instrument.
Configuring the Synopsis
In the
Overview
part of the system configuration, a synopsis can
be defined for the system. This synopsis depends on the
configured devices.
1. To save the configuration of these devices, click on the
OK
button.
2. Right click on the system name in the bottom part of the
Galaxie Configuration Manager
screen. A pop-up menu
appears: click on
Stop.
Then right click on the system name
again, and click on
Start
.
3. Go back to the System Configuration screen (
Properties
wizard). A graphic of the devices that comprise the system
is displayed in the synopsis screen. To configure the
synopsis as the real instrument configuration, move each
module, and then connect it appropriately. To do this, select
one anchor for each of the two modules (the selected
anchors become red) and click on the
button; a
connection tube will appear between the two anchors.
Click on the
to delete a selected tube, click on the
button to delete all the tubes.
Click on
to define a background color, or on
to
make the background transparent.
Click on the
icon to change the grid color.
