&
+$37(5
'
,$*5$06
&
211(&725
7
<3(
,
'(17,),&$7,21
223
C O N F I D E N T I A L
0 2 . 9 6 3 8 . 0 0 1 0
2 3 - A u g - 9 9
&RQQHFWRU7\SH,GHQWLILFDWLRQ
07$DQG07$
MTA-100 and MTA-156 connectors connect wires to PC boards. MTA-
100 connectors are smaller in size and use smaller diameter wire than
MTA-156 connectors. The connectors range from two through 10
positions and can be red, yellow, blue or black. A strain relief may be used
to protect the wire connection. This particular illustrations shows a typical
five position MTA style connector and strain relief.
&3&
CPC connectors are used to connect controller wiring to external cables.
Contact pins are crimped to the ends of wires. The wires and contact pins
are inserted into the CPC connector. Refer to the Connector Pin Locations
section in this chapter for position identification.
CON_MTA
Position 1
Strain
Relief
CONTACT
PIN
RECEPTICAL
PLUG
