![background image](http://html1.mh-extra.com/html/vari-lite/vl2000/vl2000_user-manual_3512493098.webp)
T
ROUBLESHOOTING
AND
M
AINTENANCE
A
0 2 . 9 6 7 3 . 0 0 0 1 D
02-M ay- 03
89
Rotating Gobo Replacement
WARNING:
Remove power from luminaire before performing maintenance.
Tools:
Screwdriver, Phillips #2
Hook and Pick tool (or small slotted screwdriver)
Cotton gloves
To remove and replace a rotating gobo:
Step
1. Remove power from luminaire.
Step
2. At removable cover, using #2 Phillips screwdriver, turn two captive screws one-quarter turn
and remove cover. (It will remain attached by tether and lamp wires.)
Figure A-8: Replacing a Rotating Gobo
CAUTION:
Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Captive Screws
Removable
Cover
Rotating
Gobo Wheel
www.carlosmendoza.com.mx