![background image](http://html1.mh-extra.com/html/vari-lite/vl2000/vl2000_user-manual_3512493088.webp)
T
ROUBLESHOOTING
AND
M
AINTENANCE
A
0 2 . 9 6 7 3 . 0 0 0 1 D
02-M ay- 03
79
Troubleshooting Guide
If a problem is suspected, first try recalibrating the luminaire to prompt an error message. The chart
below provides possible causes and remedies for various error messages and/or symptoms.
CAUTION:
Some troubleshooting is included for reference only. Performing remedies marked by
gray areas will void product warranty. Refer to the Vari-Lite Limited Warranty card included with the
product.
Table A-2: Troubleshooting Guide
Error Display
Description
Possible Cause and Remedy
B1M1
Whl2
NoSn
Aux Board 1, Motor 1,
Wheel 2,
Sensor Not Found
Wheel 2 power not connected, motor not moving
- Connect wheel 2 motor power at motor
Wheel 2 sensor not connected
- Connect wheel 2 sensor
Wheel 2 movement restricted or impeded
- Remove obstruction
Wheel 2 sensor is faulty
- Replace wheel 2 sensor assembly
Aux Board 1 is faulty
- Replace aux board
B1M1
Whl2
SAct
Aux Board 1, Motor 1,
Wheel 2,
Sensor Always Active
Wheel 2 power not connected and wheel 2 aligned
with sensor
- Connect wheel 2 power at motor
Wheel 2 not installed on motor shaft
- Install wheel 2 on motor shaft
Wheel 2 not installed at correct height on motor shaft
- Fully seat wheel 2 as far down the motor shaft as
possible
B1M2
Dimm
NoSn
Aux Board 1, Motor 2,
Dimmer,
Sensor Not Found
Dimmer power not connected, motor not moving
- Connect dimmer power at motor
Dimmer sensor not connected
- Connect dimmer sensor
Dimmer movement restricted or impeded
- Remove obstruction
Dimmer sensor is faulty
- Replace dimmer sensor assembly
Aux Board 1 is faulty
- Replace aux board
B1M2
Dimm
SAct
Aux Board 1, Motor 2,
Dimmer,
Sensor Always Active
Dimmer power not connected and dimmer aligned
with sensor
- Connect dimmer power at motor
Dimmer blade not installed on motor shaft
- Install dimmer blade on motor shaft
www.carlosmendoza.com.mx