![background image](http://html1.mh-extra.com/html/vari-lite/vl2000/vl2000_user-manual_3512493059.webp)
VARI
❋
LITE
®
- VL2000™ S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
5 0
02-M ay- 03
0 2 . 9 6 7 3 . 0 0 0 1 D
Default State
The menu display’s default state during normal operation is to display the address (Virtuoso or DMX).
After 10 seconds of inactivity at the display, it will change to the default state.
After longer periods of inactivity, the menu display will switch to its off state. The default state for
this feature is 5 minutes, however, different time lengths can also be programmed.
To program a different time length for menu off feature:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until
CFG
(Configuration) appears. Press [Enter].
Step
3. Press [Up] / [Down] arrows to access
DisP
(Display). Press [Enter].
Step
4. Press [Up] / [Down] arrows to select either
30s
(30 sec.),
5M
(5 minutes),
10M
(10
minutes), or
ON
(on indefinitely). Press [Enter] to set.
Decimal Placement
A decimal to the right of a menu display readout can indicate two things:
•
Virtuoso address - for example,
XXXX.
•
One of two pages - for example, the eight-digit luminaire ID number page 1:
XXXX.
and page 2:
XXXX
Figure 4-3: Decimal Indicator Location
Display Test
The Display Test will display every character on the menu display to check for missing characters.
The following procedure is used to test the display.
Step
1. Press [Menu].
Step
2. Press [Up]/[Down] until
Test
appears. Press [Enter].
Step
3. Press [Up]/[Down] until
DISP
appears. Press [Enter]. All segments in the alpha-numeric
display should be lit.
Figure 4-4: Display TestMapping
Decimal Indicator
www.carlosmendoza.com.mx