![background image](http://html1.mh-extra.com/html/vari-lite/vl2000/vl2000_user-manual_3512493027.webp)
VARI
❋
LITE
®
- VL2000™ S
POT
L
UMINAIRE
U
SER
’
S
M
ANUAL
2 2
02-M ay- 03
0 2 . 9 6 7 3 . 0 0 0 1 D
Set DMX Mode
The luminaire provide four modes for DMX operation. The mode is set using the Menu Display.
•
8-bit Standard
- provides one 8-bit DMX channel for control of each luminaire function.
•
8-bit Enhanced
- provides additional channels for timing control.
•
16-bit Standard
- provides 16-bit control for pan/tilt.
•
16-bit Enhanced (default)
- provides 16-bit control for pan/tilt and additional channels for timing
control.
To set the mode:
Step
1. Press [Menu].
Step
2. Press [Up] or [Down] button until
DMX
appears. Press [Enter].
Step
3. Press [Up] or [Down] to until desired mode is reached (
8
,
16
,
E 8
, or
E 16)
. Press [Enter]
to set mode.
See
Note:
Which mode is used may also be determined by the profile available in the DMX control
console. For best control, response, smoothest movement and transitions, the 16-bit Enhanced mode is
recommended. The 8-bit modes are supported for older style consoles with a limited number of DMX
channels available, and if profiles are not supported. The 16-bit mode is supported for DMX consoles
that do not provide access to the timing channels through either their architecture or their profiles. For
more information see
“Luminaire Timing Channel Information” on page 34
www.carlosmendoza.com.mx