Technical Manual: TM80030
THERMICA WATER TO AIR COOLER
Model range: THERMICA10-VV-MMM-LLL
Revision: 1.0
Date of release: 2022-12-16
39/55
www.vareximaging.com
6.
Maintenance
This chapter describes cleaning, preventive, and maintenance checks.
6.1.
Cleaning procedures and cleaning agents
Follow local, national, and organizational procedures regarding cleaning. The following cleaning agent is
safe to use for cleaning of the outside of the cooler encasing
Cleaning agents
Mild soap with water
WARNING:
Use of cleaning agents other than described to be save may result in damaging the Cooler
or possible injury to the user.
6.2.
Cleaning recommendations
Cooler – outside
-
Do not use abrasive cleaning products.
WARNING:
Do not spray, poor or soak the Cooler with liquids.
-
Use a soft, damp cloth to clean the Cooler, this will reduce the possibility for liquids to
enter the Cooler. Use a soft, dry cloth to remove any residuals from the Cooler.
Cooler - inside
-
Make sure the Cooler is switched OFF (see §5.1 for instructions)
WARNING:
When cleaning the inside of the cooler, the cooler needs to be switched OFF, see §6.5
-
The dust inside the cooler can be cleaned by blowing with compressed air or by sucking
with a vacuum cleaner
WARNING:
Use of abrasive cleaning agents could result in deterioration of the Cooler. E.g., the
interface of the controller can be damaged which will result in reduction of visibility of the
display.
