VAREL RXFM6, Manual

Page: 3 / 30

ENGLISH
3 - E
To carry out a full battery recharge, follow these instructions:

Connect the power supply cable to the dedicated socket on the left light;

Connect the cable to the cigar lighter socket or to the 230Vac outlet;

The left tail light will be ON indicating that the charge is in progress;

The left tail light will turn OFF when the charge is completed (after about 6
hours);

When the charge is complete, disconnect the charging cable.
When the light set is turned ON (position RADIO or ON) a test of all the lights will be
carried out in sequence to verify that they are working, then the STOP lights will blink
if the available battery charge is between 100% and 60%, the DIRECTION
INDICATORS will blink if the charge is between 60% and 30%, the TAIL lights will
blink if the charge is less than 30%, if only the left TAIL light blinks shortly every 4
seconds then the battery is totally run down and it is best to recharge it.
LIGHTS

External appearance
The lights pair have a magnetic base (with a rubber pad) or a pump suction cup
and a tilt bracket allowing a better directional control. Labels indicate the
installation position and function of each element.

RIGHT LIGHT (RIGHT): in addition to the label, a waterproof 3-position
switch on the back and the connection cable for the left light, characterize the
right light.

LEFT LIGHT (LEFT): has no switch and no cable. A 5-pin connector for the
connection with the right light is present on the back and the magnetic self-
centering charging connector.