To get collet to open wider than outside diameter of bearing, simply turn tool mandrel in a counterclockwise
direction. Then turn tool mandrel in a clockwise direction until blades begin to wedge under bearing. Keep on
tightening until blades are snug under bearing.
3. Turn handles in a clockwise direction until pressing disc of tool begins pressing on top of crank spindle. Keep on
turning handles to fully remove bearing.
Regular maintenance
Release tension in collet by turning tool mandrel before storage otherwise collet will loose its spring action and its
lifespan will be shortened. Regularly grease any mobile parts. The various parts of
DR-10100
are available as spare
parts.
DR-03500
DR-14700
PE-10800-10
PE-10800-14
PE-12900
PE-13200
DV-71102
