Espace Eiffel - Lot D6
19 et 21, Avenue Gustave Eiffel
28630 Gellainville - FRANCE
+33 2 37 33 37 10
EN
CD-03600
HEAD TUBE AND BOTTOM BRACKET SHELL
REAMING & FACING SET
VAR thanks you for purchasing
CD-03600
, specially designed for head tubes and
unthreaded bottom bracket shells reaming and facing, before headset or pressed-in
bottom bracket installation .
The support can be purchased without cutter (
CD-03600
) or with a 44mm headtube
cutter t(
CD-03600-44
).
Please read this manual carefully before each use.
The set contains :
- 1 headset and bottom bracket shell cutting tool support
- 1 tapered pilot
- 1 bearing ring
- 1 compression spring
- 1 push ring
Recommendations
CD-03600
and its cutting tools are precision tools that have to be used and stored
with care, avoiding shocks, falls and mistreatments.
The cutting tools must be cleaned after each use, with a lubed cloth or an anti-rust
solution.
Never use traditional lubricants, which are not suitable in metal machining and
lower the machining quality and your cutting tools lifespan.
1/4
