107
en
fr
es
it
nl
de
7. TH E U S E O F H EM P FLOW ERS
7.4.1. Application
Before using the Tube, switch
off the pump by pressing the
touch button labeled ‚AIR‘.
Place the Filling Chamber with cap on
the Hot Air Generator and screw it on
clockwise as far as it will go. Switch on
the heater (HEAT), adjust the set tem-
perature and let it heat up. When the
actual temperature corresponds to the
set temperature, place the Tube Kit on
the Filling Chamber and let it lock in
place.
Tube with attached Mouthpiece
7.4. Application Part: Tube Kit
When observing the Instructions for Use and with a vaporization temperature of
210°C (410°F) the following reference values are validated in studies:
In order to reach these values, inhalation must be continued until there is no aer-
osol (vapor) recognizable when exhaling. The Filling Chamber’s content is then
depleted.
Drug (Filling
Chamber Content)
drug A (100 mg)
drug B (100 mg)
THC: approx. 19 mg
THC: approx. 6 mg
CBD: approx. 7,5 mg
approx. 12 mg
approx. 4 mg
approx. 5 mg
approx. 8,25 mg
approx. 2,75 mg
approx. 3,4 mg
Cannabinoid
content in drug
Cannabinoid con-
tent in Valve Balloon
after vaporization
with 210°C (410°F)
Cannabinoid
content in blood
stream (systemic
bioavailability)
after inhalation
7.4.2. Inhalation
Slowly inhale the vapor from the Tube
with the Mouthpiece for a few se-
conds.
Summary of Contents for 01 01 M
Page 2: ......
Page 69: ...69 de en fr es it nl ...
