Vaporfi VOLT 2, Quick Start Manual

Page: 8 / 20

1. To Rebuild your RBA, unscrew the top cap and side screw
to reveal the buildable deck.
2. Once this rebuildable deck is exposed, unscrew your used
replacement wire and discard it.
3. Take the replacement Volt Series RBA Replacement Wire
and mount into the screw holes and tighten the screws. (Be
sure to tighten the screws as much as possible in order to
ensure the best possible contact.)
4. Feed cotton into the center wrap of the wire and pull the
cotton through. Once the cotton is fed through the wire
hole, cut the cotton ensuring that it sits snuggly into the
deck.