Vaporetto DIFFUSION, Instruction Manual

Page: 25 / 84

藐
7. FRESCOVAPOR
(only for model Vaporetto Diffusion)
FrescoVapor is a air freshener that contains
natural substances. When mixed with steam it
releases a fresh perfume in every space and,
thanks to its special composition, it is able to
eliminate bad odours.
To use FrescoVapor, proceed as follows:
• Unscrew the cap (4) of the deodorant reser-
voir and fill it with FrescoVapor (5).
• Screw the tank cap back on taking care to
fasten it correctly (6).
• It’s possible to adjust the quantity of Fre-
scoVapor to be mixed with the steam by tur-
ning the knob, close to the steam button (7).
• In the OFF position, the deodorant is not
mixed.
• At the “min” position, a minimum quantity of
deodorant will be mixed with the steam.
• At the “max” position, a maximum quantity of
deodorant will be mixed with the steam. The
surface will be slightly damper, since Fresco-
Vapor mixes with the steam being dispensed.
Contents: 200 ml
FrescoVapor is on sale at household applian-
ce stores, at Polti authorised service centres
or on the site www.polti.com.
8.
OUT OF WATER
When the appliance does not release steam
anymore, this means there is no more water in
the boiler.
To continue with use, proceed as follows:
•
Unplug from the mains electricity.
• Act on the steam request lever until steam
flow ceases.
• Wait five minutes and remove the safety
cap, unscrewing it without force.
• Leave the appliance to cool for at least 10
minutes.
• Filling the boiler as indicated on chapter 1.
• Carefully screw the safety cap back on,
checking that it is completely closed.
9. GENERAL MAINTENANCE
Before carrying out any maintenance on the
device, always unplug it from the power
mains making sure that the product has coo-
led down before proceeding.
To clean the outside of the appliance, only
use a damp cloth and tap water.
All accessories can be cleaned using running
water, ensuring they are completely dry befo-
re the next use.
Do not use detergents of any type.
After using the brushes, we recommend let-
ting the bristles cool down in their natural po-
sition, in order to avoid any deformation.
10. STORAGE
10.1 Turn off the appliance and disconnect
from the mains electricity.
10.2 Wait for the appliance to cool down
completely before storing it.
WARNING: Before cleaning the surface,
always do a test on a hidden part and see
how it reacts to the application of steam.
WARNING: Do not swallow. Keep out of the
reach of children.
WARNING: Never put FrescoVapor in the
boiler.
Only use water in the boiler, following the
instructions listed in the chapter 1.
WARNING: Before using FrescoVapor on
upholstery, leather, special fabrics and
wood surfaces, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or sample of the material. Allow
the steamed part to dry to make sure that
no changes in colour or deformations have
occurred.
WARNING: Never fill the boiler as soon as
the safety cap has been opened when the
boiler is still hot, even if the appliance is un-
plugged from the mains. On contact with
the hot, empty boiler, cold water will evapo-
rate producing a spray of steam which can
cause burns. Only fill the boiler when cold
and always keep your face away from the
boiler mouth when filling.
WARNING: Steam.
Risk of scalding!
WARNING: If, during unscrewing, the cap
spins freely or if steam is escaping, imme-
diately stop the operation, ensuring that the
boiler is switched off and the power cable is
unplugged from the mains. Wait for the ap-
pliance to cool (two hour) and unscrew the
cap before removal. TAKE CARE OF YOUR
FACE !!!
WARNING: Do not direct the steam jet di-
rectly onto surfaces.
E
N
G
LI
SH
| 25 |
VAPORETTO DIFFUSION - FIRST - M0S11096 - 1Q12_FEV 1000-950.qxd 18/01/2017 14:41 Pagina 25