VTE600-Combo
Intelligent Li-Po/LiFe Battery Pack Balance Charger Product Instructions
Thank you to choose our VTE600 Combo Charger, it is perfect balance charger for your Li-Po and LiFe 1S to 3S Batteries.
Model No.: VTE600 Combo Balance Charger
Intelligent Li-Po / LiFe Battery Pack Balance Charger (1-3 Series)
VTE600 Combo Balance Charger is special design for Lithium-ion Polymer, Lithium-ion battery or Lithium-Iron-Phosphate
(LiFePO
4
) Battery, from 1S to 3S Battery Packs. It can not be used for Ni-Cd or Ni-MH rechargeable Batteries, or Primary
Batteries.
SAVE THESE INSTRUCTIONS
Characteristics
1
、
Special microcomputer controlled, ensure balance precision within 15mV.
2
、
Combo charger for both Li-Po and LiFe Batteries.
3
、
Build-in Power supply make it more slim and easy to take.
4
、
Automatically detects and controls the voltage of each cell independently, ensures a balance voltage between
cells.
5
、
Each cell’s charge situation can be clearly displayed by one corresponding
LED
..
6
、
Input has protective function of short circuit and opposite connection.
7
、
The out-off voltage of charger between 4.20±0.015V/cell for Li-Po batteries, and.3.65±0.015V/cell for LiFe
batteries
Method for Charging Rechargeable Batteries
1)
Put the Plug in mains socket; the three
LEDs
will be
BLUE when put on Li-Po Position, or GREEN when put on LiFe
position.
2)
Choose the right position of the charger to charge you Li-Po or LiFe Battery. To use Li-Po function to charge LiFe
battery will be over-charge. And to use LiFe function to charge Li-Po battery will be not fully-charge. And One time
it can only charge one piece Battery.
Caution
◆
Prohibited charge with Multi-Groups Batteries at the same time!
◆
Prohibited charge LiFe Battery by Li-Po Function, the Battery maybe
too hot to Fire! To charge Li-Po Battery by LiFe Function, the battery will
not be fully charged!
3) Plug 1S~3S Battery pack into the charge port of charger; Ensure that +/- polarity is correct, or
the charger will not work, The charger may be broken.
4) Charging process will start.
When charging 1S battery, 1CELL LED will be RED. 2CELL & 3CELL LEDS will keep BLUE (Li-Po) or GREEN (LiFe).
When charging 2S Battery, 1CELL & 2CELL LEDs will be RED, 3CELL LED will keep BLUE(Li-Po) or GREEN(LiFe).
When charging 3S Battery, 1CELL, 2CELL & 3CELL LEDs will be all RED.
When the RED LEDs
turns to RED/BLUE(Li-Po), or RED/GREEN(LiFe), the battery nears 80%~90% charged,
When the RED LEDs
turns to BLUE(Li-Po), or GREEN(LiFe), the battery is fully charged,
5) Unplug the Battery from the charger, and unplug the plug from the mains.
