Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SOM-I500P-EVB | User Manual 17
2.4.9
J14/J16 Vibrator (10)
The vibrator interface combines two connectors (J14 & J16) as shown below.
Pinout description of J16:
Pin
Signal
Description
1
VIBR_PMU
Vibrator power signal
2
D_GND
Digital ground
3
D_GND
Digital ground
Pinout description of J14:
Pin
Signal
Description
1
D_GND
Digital ground
2
FLASH_LED2
Flash light power signal
3
FLASH_LED1
Torch power signal
2.4.10
J15/J17/J29 UART (11)
VT-SOM-I500P-EVB implements three UART connectors. UART1 (J17) corresponds to node
ttyS1. UART2-1 (J15) and UART2-2 (J29) are converted from two SPI connectors,
corresponding to nodes ttysWK0 and ttysWK1.
Pin 1
Pin 1
Pin 1
Pin 1
Pin 1
