VT-SBCQ7-MX6Q Boards User’s Manual
All rights reserved Page 5, Total 30
For direct or indirect damage to this device or other devices of Vantron caused by failure of
conforming to this manual or the safety instructions on device label, Vantron assumes neither
warranty nor legal liability even if the device is still under warranty.
1.6
Safety Instructions
Keep and comply with all operation instructions, warnings, and information.
Pay attention to warnings on this device.
Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any
damage to the device.
1.7
Precautions
Pay attention to the product labels/safety instructions printed on silk screens.
Do not try repairing this product unless declared in this manual.
Keep away from heat source, such as heater, heat dissipater, or engine casing.
Do not insert other items into the slot (if any) of this device.
• Keep the ventilation slot vent
ilated for cooling.
•System fault may arise if other items are inserted into this device.
Installation: ensure correct installation according to instructions from the manufacturer with
recommended installation tools.
Ensure ventilation and smoothness according to relevant ventilation standard.
1.8
Safety Instructions for Power Cables and Accessories
Proper power source only
Start only with power source that satisfies voltage label and the voltage necessary according to this
manual. Please contact technical support personnel of Vantron for any uncertainty about the
requirements of necessary power source.
Use tested power source
This product still contains a button lithium battery as a real-time clock after its external power source
is removed and therefore should not be short-circuited during transportation or placed under high
temperature.
Place cables properly:
Do not place cables at any place with extrusion danger.
