Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-RK3568-NT | User Manual 23
3.
Select a Wi-Fi network from the list;
4.
Input the password of the access point and verify;
5.
You will connect to the access point after successful verification.
3.1.6
USB
Input the following commands to check/configure the USB interface.
1.
Check the USB interface information:
~$ lsusb
2.
Mount the USB drive to /mnt:
~$ mount /dev/xxx /mnt
3.
Check the mounted content in /mnt:
~$ ls /mnt
4.
Unmount the device:
~$ umount /dev/xxx
