IQ Hub v1.1
17
/
22
5
Safety Instruction
This section provides warnings that precede potentially dangerous procedures throughout this
manual. Instructions contained in the warnings must be followed during all phases of operation,
service, and repair of this equipment. You should also employ all other safety
precautionsnecessary for the operation of the equipment in your operating environment. If you
are not sure about the precautions applicable to your operating environment, please contact your
company’s safety administrator. For basic information you may also refer to the safety
precautions per IEC704-1 listed below although Vantron disclaims all responsibility for the
accuracy of any state- ments contained therein and its applicability for your specific
environment.Failure to comply with these precautions or with specific warnings elsewhere in this
manual could result in personal injury or damage to the equipment.
Vantron intends to provide all necessary information to install and handle the IQ Hub in this
manual. Because of the complexity of this product and its vario us uses, we do not guarantee that
the given information is complete. If you need additional information, contact your Vantron
representative.
The product has been designed to meet the standard industrial safety requirements. It must not
be used except in its specific area as specified in product specification.
Only personnel trained by Vantron or persons qualified in electronics or electrical engineering is
authorized to install service or maintain the product. The information given in this manual is
meant to complete the knowledge of a specialist and must not be used as replacement for
qualified personnel. Operating personnel must not remove equipment covers. Only factory
authorized service personnel or other qualified service personnel may remove equipment covers
for internal subassembly or component replacement or any internal adjustment.
Do not install substitute parts or perform any unauthorized modification of the equipment or the
warranty may be voided. Contact your local Vantron representative for service and repair to make
sure that all safety features are maintained.
Safety Precautions per IEC704-1
1. Read these safety instructions carefully.
2. Keep this User Manual for later reference.
