Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
IBOX66 | User Manual
14
2.1
Hardware Connection
Before you proceed with the configuration of IBOX66, follow the steps below to finish
hardware connection.
1.
Position the Device on a desired place, for instance, a wall or a desktop
;
2.
Align the screws (M4 x 6 / M4 x 8 recommended) to the screw holes reserved on the
mounting bracket, and mark the position of the screws on the wall or the desktop;
3.
Drill four screw holes on the marks made in the prior step;
