Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | C335 Series User Manual
24
1.8
System Boot
The system boots up from eMMC by default.
1.8.1
System boot and eMMC flashing from an SD card
1.
Open the Gateway box;
2.
Set DIP switch S1 to
off:off:on:off
(C335L & C335S) or
off:off:on:on
(C335) as shown
below;
3.
Make a bootable SD card/USB drive;
1)
Insert the SD card/USB drive into a Linux host and input a dmesg command to get
the path of the SD card/USB drive (for instance, /dev/sdb);
2)
Input the following command line to unzip the image package (C335S for
instance):
unzip XOS_sd2mmc_VT-M2M-C335S_“version number”.zip
C335L
C335
C335S
