CONNECTING:
Once pairing steps have been completed, the operator should proceed with the
following steps to connect Vesper and Vision GCS:
1.
Power on Vesper and Vision GCS.
2.
For 1.8 GHz units, ensure Vesper is at least 15 feet from Vision GCS
(does not apply to 2.4GHz units).
3.
Telemetry and video will appear in QGC after about 50 seconds - after
Vesper emits startup tune.
4.
If video does not appear after 60 seconds, see “Connecting with GCS”
in the Troubleshooting section.
USER INTERFACE
VISION GCS VIEW MENU:
Vision GCS’ user interface has multiple modes, called “Views,” each in its own
tab.
Views are displayed on the upper left navigation bar of the screen, whether or
not Vesper is connected. To change views, the operator can tap each icon and
access different features.
45