3.
The Ground Control Station (GCS) will display Vesper on the map:
○
The red arrow indicates Vesper’s location.
○
The line indicates where Vesper has traveled.
4.
If desired, the operator can make Vesper pause (suspended in the air)
in its current location by using the control sticks on the GCS or by
simply pressing the Pause button on the Fly
menu.
RETURNING VESPER AFTER FLIGHT
●
If Vesper was set to “Return to Launch” upon ending the mission,
Vesper will fly directly to that point, rather than retrace the plotted
course.
●
If “Return to Launch” was not set when the flight plan was created,
Vesper will stay at the last waypoint until instructed to return to its
launch location.
●
The operator can initiate “Return to Launch” by following these
direction:
1.
Press the RTL button
in the Fly menu.
2.
The GCS display will receive a prompt at the bottom of the
screen.
3.
Swipe “Slide to confirm.”
27