DOWNDRAFT PRO
96061
25799 Jefferson Ave.
Murrieta, CA 92562
1-800-VANIMAN (826-4626)
www.vaniman.com
DD-PRO--96061-12/17 Page 1
PACKING LIST
1 - Stainless Steel Worktop
1 - Worktop Sub-assembly
1 - Shield Assembly
1 - 1-1/2" Hose End
2 - 10-3/4" Screw
2 - 10-32 Nuts
ASSEMBLY INSTRUCTIONS
1. Remove the unit and other parts from the box and check against the packing list.
2. Use the attached mounting instructions to cut the correct hole in the countertop.
2. Set the DownDraft Pro in place.
3. Align holes with threaded studs and hold the worktop sub-assembly up while threading the 10-32 nuts on
the studs.
4. Use the #10 screw to secure the sub-assembly to the bottom of the work bench
5. Tighten all fasteners.