Keyboard Operation
© Vanderbilt 2017
25
6.1.3
Scene Calling
Purpose:
For the MAG, video wall controller, and decoder added to the keyboard, you can configure the scene via the
Eventys RAS client first and follow the steps below to switch the scene.
1.
In the
Keyboard
operation mode, press the
Num + DEV
buttons on the keyboard panel to select the
device ID (decoder and video wall controller).
2.
Press the
Num + SCENE
buttons on the keyboard panel to switch to the defined scene.
The scene of the video wall must be pre-configured for the decoder via client software.
Figure 6-5
Scene Calling
6.1.4
AUX Functions
The keyboard is designed with AUX/F2 key on its panel. You are allowed to configure the AUX/F2 key to
picture capture or screen jointing functions.
Screen Jointing of Video Wall
1.
Log in to the decoder or video wall controller via Web browser, and configure the video wall settings.
Please refer to the user manual of decoder or video wall controller.
2.
Log in to keyboard via Web browser (https://ip address), and enter the
Aux Key Settings
page (
System
Management > Aux Key Settings
).
3.
Set the Aux key function to
Screen Jointing
.
4.
Click
Save
to save the settings.