© Vanderbilt 2017
16
3.5
Modifying the IP Address
Purpose:
To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the
same subnet with your PC. Then, install the Eventys IP Search Tool software or client software to search and
change the IP of network camera. We will take modifying the IP Address via Eventys IP Search Tool software as
an example to introduce the IP address modification.
Steps:
1.
Run the Eventys IP Search Tool software.
2.
Select an activate device.
Note:
Please refer to Section 3.2 to activate the camera if the camera is inactive.
3.
The default IP address is
192.168.0.10
.
4.
Change the device IP address to the same subnet with your computer by either modifying the IP address
manually or checking the checkbox of Enable DHCP.
Figure 3-4 Modify the IP Address
5.
Input the password to activate your IP address modification.
Eventys IP Search Tool supports the batch IP address modification. Please refer to the User Manual of Eventys
IP Search Tool for details.
Summary of Contents for CCMD2010-OIR
Page 19: ...Vanderbilt 2017 19...
