2. Press the
LASER
key under the infrared state. The
meter will enter the measurement state and launch a
beam of red laser. Point the laser to the measured object
and press the
SCAN/H
key to achieve the continuous
temperature measurement.
3. Press the
SCAN/H
key under the thermocouple state
and the data will be held. Press the
SCAN/H
key again
to return the measurement state.
* If you still need more operations, please see the
description of keys instruction.
5 Keys instruction
1.TYPE/ON/OFF key
ON/OFF
: Press the key to turn the power ON and press
the key once more >2sec. to turn the power OFF.
TYPE:
Press the key to select the mode of infrared or
thermocouple.
