The included battery in the PA360 is a lithium-ion battery. If not regularly used, the battery
must be conditioned every 6 months to avoid battery failure. To condition the battery,
simply plug in the PA360 to power, and charge to full level.
To replace the battery on the PA360, the replacement part # is BATT-360. See below for
instructions to replace the battery:
PA360
Battery
Replacement
1. At the bottom of the PA360, you will find a panel with three Phillips screw heads, unscrew
all three and lift panel up to expose the battery
2. Once the battery is exposed, locate the connector. The connector has one tab, press the
tab and the opposite end, and pull the connector out to disconnect the battery