MS-350 NP Operating Instructions Ver 4.02E
32
Essential tools: Phillips screwdriver
Replace when: The temperature sensor is damaged.
The temperature sensor is also sold individually.
The temperature sensor is positioned so that it slides in
between the heating element and glass tape. The
temperature sensor is attached on the right end of the
pressure lever.
How to remove the temperature sensor
1
Remove the center-dry tape referring to “10-2
Center-dry tape replacement” (→ page
28).
2
Remove the heating element referring to “10-3
Heating element replacement” (→ page
3
Disconnect the temperature sensor connector.
4
Remove Screw A-1, Screw A-2, and Screw B to
remove the temperature sensor fixing plate and
remove the temperature sensor.
10-7 Temperature sensor replacement
Temperature sensor module
Screw B
Screw A-2
Screw A-1
Temperature sensor
fixing plate
Temperature sensor
fixing plate
Heating element
Heating element
