Valueline IPC
2-8
PHOENIX CONTACT
2637_en_D
2.2.3
Installing PCI cards
Installing a PCI card in the optional PCI slots is done as follows:
1.
Ensure the card does not exceed the maximum dimensions for the intended slot (see
2.
Remove power from the unit.
Figure 2-6
Cover removal
3.
Place the unit on a soft cloth on a flat, horizontal surface with the ribbed surface (cover)
up.
4.
Remove the four Phillips-head screws, 1, from the cover, 2, and remove the cover.
NOTE:
Use standard ESD precautions when removing or installing PCI cards to avoid damage to
the cards and the VL IPC.
The PCI card option is not available with the Atom standard chassis.
PCI Slot 0
PCI Slot 1
2
3
1
Do not remove the tamper-proof (Torx
®
) screws, 3.
