Valueline IPC
3-22
PHOENIX CONTACT
2637_en_D
Adjusting colors
Click the “Color Correction” tab on the left side to access color, gamma, brightness and
contrast settings.
Figure 3-22
Color corrections
Click the “Apply” button to apply the settings to the selected display.
3.7.3
Multiple Display configuration
The VL IPC allows two displays to be connected at the same time using either the built-in
touch screen display, or displays connected to the VGA or DVI-D ports (see “External
The configuration options for multiple displays are:
–
Twin: outputs the same content with the same configuration settings to displays
connected to the DVI-D and VGA ports. A digital display device must be connected to
the DVI-D Port for the Digital Display selection to be available.
–
Intel(R) Dual Display Clone: typically used for two display devices functioning at
different resolutions and refresh rates, such as with a touch screen display and an
analog projector.
NOTE:
Although two (2) external ports and an internal port (to the touch screen display) exist, only
two can be active at the same time.
