Valtra Versu N Series Operator'S Manual Download

Page: 420 / 518

GUID-40FAA34E-25CF-4A60-B770-24BDC40BF542

1. Suction strainer cover

2. Suction strainer

1. Remove the suction strainer cover.
2. Wipe off any oil which has run out on the chassis.
3. Clean the suction strainer in diesel fuel.

Replace the suction strainer if it is damaged.

4. Dry the suction strainer with compressed air.
5. Refit the suction strainer, gaskets and cover.
Fill the transmission with oil.

4.7.6.4

Bleeding the brake system

The brake system uses the same oil as the transmission system. The oil in the

brake circuits is not changed when changing the transmission oil. Therefore, the

brake circuit oil has to be changed by bleeding after every transmission oil

change. Also when repairing, the system has to be filled and bled in the same

way.

4. Maintenance

- 418 -

Summary of Contents for Versu N Series







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands

Valtra Versu N Series, Operator'S Manual

Search results

Summary of Contents for Versu N Series

Reviews:

Related manuals for Versu N Series

Brands by name

Popular brands