1. Activate the setting mode.
Press and hold down the
button until the symbol for the value to be set
is blinking.
2. Display the available parameters.
Press the side of the display setting switch opposite to the symbol. The
available parameters are presented in the following table.
Parameter
Parameter value
Implement width
0–6 500
Set clock
Hours and minutes
Clock mode
12–hour or 24–hour
Direction indicator buzzer status
On or off
Temperature unit
Celsius or Fahrenheit
Length unit
Metric or imperial
Volume unit
Litre or UK gallon or US gallon
Front power take-off speed view
On or off
Front lower links' position view
On or off
Display contrast
80–120
3. Exit the setting mode.
Press the
button to save the value and return to the previous display.
3.10.5.2 Changing the parameter value
5
20
30
40
50
0
5
0
20
25
30
1
GUID-5847AA62-42CB-4FB8-9936-D7E6A7D2C2A6
1. Control panel for A-pillar display and Proline
•
Increase a parameter value.
•
Press the up arrow button.
The parameter value increases one step at a time.
•
Press and hold down the up arrow button.
The parameter value increases continuously.
3. Operation
- 170 -
Summary of Contents for Versu N Series
Page 1: ...OPERATOR SMANUAL NSERIES Versu Ref no 39 893 21 3 08 2015 YOUR WORKING MACHINE...
Page 2: ......
Page 517: ......
